China Desulphurization Equipment Industry Report, 2007
  • Apr/2007
  • Hard Copy
  • USD $1,800 $900
  • Pages:120
  • Single User License
    (PDF Unprintable)       
  • USD $1,900 $950
  • Code:
  • Enterprise-wide License
    (PDF Printable & Editable)       
  • USD $2,850 $1,425
  • Hard Copy + Single User License
  • USD $2,000 $1,000

China plans to invest RMB 1.375 trillion in social environmental protection during the 11th Five-Year Plan period, of which approximately 10% or RMB 137.5 billion is going to flue gas desulphurization (FGD), according to State Environmental Protection Administration of China. Presently, the installed capacity of desulphurization facilities that established or being established reached about 13.3 Million kW, accounting for 3.61% of 36,800 Million kW of the total of thermal power.

Currently, 90% of SO2 emission and 70% of NOx emission are produced from coal burning, 50% of which is from coal power plants. The data showed that total SO2 emission of China's thermal power industry reached 11 million tons and 13 million tons in 2003 and 2004 respectively and, the figure approached 16 million tons in 2005. In 2005, China issued Decision on Implementing the Scientific Concept of Development and Stepping up Environmental Protection by the State Council, which sets the goal for China's environmental protection in the next five to fifteen years, and brings along desulphurization industry with new development opportunities.

By the end of 2005, the operated FGD unit capacity rose from 5 million kW at the end of 2000 to 53 million kW, accounting for some 14% of thermal power installed capacity, of which, unit of 100,000 kW and above reached 44 million kW. FGD installed capacity under the construction would exceed 100 Million kW.

Being lack of industrial standards and laws & regulations plus low threshold, a lot of medium- and small-scale enterprises (number of which increase from 2 in 2001 to 200 in 2006) compete maliciously in the market by price war, which resulted in the gross margin of desulphurization industry dives steeply.

As social economy has been developing, SO2 emission of thermal power industry will share an increasingly higher proportion in national total SO2 emission. In a country dominated by thermal power, the proportion of SO2 emission of thermal power to national total SO2 emission can indicate whether or not environmental protection of this country is good. The current proportion in China is equal to the late 1960s or early 1970s of the US, UK, or former Federal Republic of Germany.

Strengthening the control over low level sources is an important measure to promote air quality. By 2020, China will resolve the problems of SO2 pollution entirely and SO2 emission will be limited within 12 million tons nationwide; the proportion of SO2 emission of thermal power is expected to account for 55% of total SO2 emission (6-7 million tons).

According to current environmental policies, by 2020, installed power generation capacity will reach 800 million kW, of which, the thermal power will account for 70%-75%. To achieve the goal of SO2 control of power industry, FGD capacity of coal unit needs to reach 350 million kW nationwide; static investment alone is as high as RMB 140 billion and annual operating costs will reach around RMB 35 billion.

If carrying out pollution discharge right trading policy and installing FGD on high-sulfur-coal-fired bit units, FGD capacity can be reduced to 150-180 Million kW under the precondition of meeting the same environmental standard, which is the same as or a little bit higher than the US FGD capacity. In this way, investment and operating costs can fall at a half, saving static investment of RMB 70-80 billion and annual operating costs of RMB 15-20 billion.

1 Overview of China desulphurization industry
1.1 Characteristics of SO2 and NOx emission
1.1.1 Characteristics and hazards of SO2 and NOx
1.1.2 Status of SO2 and NOx emission
1.1.3 Distribution characteristics of SO2, NOx and acid rain in China
1.1.4 Pollutions caused by SO2, NOx and acid rain
1.2 Policies, laws and regulations on the control over NOx pollution
1.2.1 Law on Prevention of Air Pollution
1.2.2 The Outline of the Eleventh Five-Year Plan for National Economic and Social Development
1.2.3 China Trans-Century Green Engineering Program
1.2.4 Program on major cities suffering air pollution
1.2.5 Acid rain and NOx control zones and pollution prevention program in the two control zones
1.2.6 Pollution discharge fee system and pollution discharge permit system
1.2.7 Key measures on controlling SO2 and acid rain in China
1.2.8 Technology policies on desulphurization industrialization
1.3 Environmental standard on SO2 and NOx
1.4 Review of China desulphurization industry
1.5 Analysis of industries associated with desulphurization industry
1.5.1 Steel & iron industry
1.5.2 Power station construction
1.6 Development characteristics of China FGD industry

2 Overview of global desulphurization industry
2.1 Germany
2.1.1 Applications of FGD devices
2.1.2 Production
2.2 The US
2.2.1 Applications of FGD devices
2.2.2 Production
2.3 Overview of overseas FGD technologies
2.3.1 Wet FGD process
2.3.2 Semidry FGD process
2.3.3 Dry desulphurization process
2.4 Global key environmental desulphurization enterprises
2.4.1 ABB
2.4.2 Mitsubishi Heavy
2.4.3 Hitachi
2.4.4 SIDEC
2.4.5 Fortum
2.4.6 LLB

3 Economic operations of China desulphurization industry
3.1 Output analysis
3.1.1 Total output
3.1.2 Output of leading enterprises
3.2 Profitability
3.2.1 Operating margin
3.2.2 Return on assets
3.3 Price analysis
3.3.1 Review of price trend
3.3.2 Causes for price forming
3.4 Market competition

4 Overview of China FGD devices supply
4.1 Market status of enterprises by ownership
4.1.1 Foreign-owned enterprises
4.1.2 China's domestic enterprises
4.2 Technology introduction of different producers
4.3 Operations of FGD devices in China
4.4 Typical case study on FGD cost

5 Overview of desulphurization technologies
5.1 Plaster FGD
5.6 Seawater desulphurization technology
5.7 EB desulphurization technology
5.8 Ammonia-washing desulphurization technology

6 Leading enterprises of China desulphurization industry
6.1 Beijing SP Longyuan Environmental Protection Engineering Co., Ltd
6.2 Wuhan Kaidi Electric Power Environmental Protection Co., Ltd
6.3 Beijing Bootes Electric Power Sci-Tec Co., Ltd
6.4 CPI Yuanda Environmental-Protection Engineering Co., Ltd
6.5 Zhejiang Tiandi Environmental Protection Engineering Co., Ltd
6.6 Jiangsu Suyuan Environmental Protection Engineering Co. Ltd
6.7 China Huadian Engineering Co., Ltd
6.8 Guohua Ebara Environmental Engineering Co., Ltd
6.9 Beijing SPC Environmental Protection Tech Engineering Co., Ltd

7 Forecast of demands for desulphurization facilities in China
7.1 SO2 emission of thermal power industry
7.2 SO2 control objectives of thermal power industry
7.3 FGD capacity of thermal power plants
7.3.1 Forecasted FGD capacity according to current policies of China
7.3.2 Forecasted FGD capacity according to pollution discharge right trading policies
7.4 Forecast of demands of thermal power plants of China for desulphurization facilities

8 Suggestions on investment in desulphurization industry of China
8.1 Problems in China desulphurization industry
8.2 Advantages of China FGD industry
8.3 Opportunities and risks of China FGD industry
Basic information about FGD demonstration projects of thermal power plants in China
Comparison of desulphurization technologies
Qualitative comparison of FGD devices
Technology performance of six different FGD demonstration projects in China
Air quality in China, 2000-2006
Emission of major pollutant in exhaust gas in China in recent years
Resource-centered utilization of desulphurization slag
Current production technology of desulphurization gypsum
Desulphurization companies with contract capacity over 4000MW and operation capacity over 200MW
Sales of Wuhan Kaidi Electric Power Environmental Protection Co., Ltd, 2006
Regional sales of Wuhan Kaidi Electric Power Environmental Protection Co., Ltd, 2006
Sales of LONGKING by region, 2006
Proportion of SO2 produced by electric power industry to total emission in the US
Forecast of objective on SO2 control of electric power industry in China
Overview of electric power industry in China and the US
FGD system of thermal power plants of the US
Output of equipments for controlling air pollution in China, 2001-2006
Regional output of equipments for controlling air pollution in China, 2001-2006
China's desulphurization facilities industry, 2006

Global and China Hydraulic Industry Report, 2014-2017

Hydraulic parts are the crucial basic components to modern equipment manufacturing and widely used in the fields such as construction machinery, metallurgical machinery, plastic machinery, aerospace, ...

Global and China Bi-Metal Band Saw Blade Industry Report, 2014-2017

The sales volume of bi-metal band saw blade continued to slide in China, totaling 49.45 million meters throughout the year 2013, down 2.5% year on year, largely due to international financial crisis, ...

China Packaging Machinery Industry Report, 2014-2017

In 2013, China manufactured 109,800 sets of packaging equipment, up 13.46% year on year, generating total revenue of RMB27.095 billion, a jump of 7.75% from a year earlier. The industry’s total revenu...

Global and China Bearing Industry Report, 2013-2016

Bearing is a key component in contemporary mechanical equipment, finding wide application in automobile, electromechanics, construction machinery, household appliances, metallurgy and mining machinery...

Global and China Elevator Industry Report, 2014

The accelerating urbanization, large-scale construction of indemnificatory housing and rapid development of public transportation in large and medium-sized cities in China slow the decline of elevator...

Global and China Fiber Optic Sensor Industry Report, 2013-2018

Optical fiber sensor (OFS) is a new type of sensor with light wave as a carrier and optical fiber as a medium, possessing high sensitivity, interference immunity, anti-corrosion, high-pressure resista...

China Lithium Battery Equipment Industry Report, 2014-2016

Lithium battery equipment manufacturing started late in China, although a batch of professional manufacturers have sprung up in succession, the technology of homemade equipment is still less advanced ...

China Air Compressor Industry Report, 2014-2017

In recent years, with steady growth of China’s economy and sustained expansion of fixed-assets investment in equipment manufacturing industry, air compressor has been widely used in various industries...

China Motion Controller Industry Report, 2013-2016

In recent years, China has seen rapid development in machine tool, textile, printing, packaging, electronics, and other industries, which has boosted the demand for motion controllers. In 2006-2012, t...

Global and China Industrial Robot Speed Reducer Industry Report, 2013-2016

Speed reducer is one of three core parts of industrial robot, along with two others (drive and control device, servomotor), accounting for about 36% of the industrial robot’s total cost. China has m...

Global and China Power Tool Industry Report, 2013-2014

Global and China Power Tool Industry Report, 2013-2014 mainly includes the followings: 1. Introduction to power tools2. Global power tool market and industry3. Global property and infrastructure cons...

Global and China Low and Medium-voltage Inverter Industry Report, 2013-2016

In 2013, the rising demand from China's industrial control industry helped drive the recovery of low and medium-voltage inverter market, with the market size of low and medium-voltage inverters in Chi...

Global and China Mould and Die Industry Report, 2013-2015

Mould, known as "the mother of industry," is developing in the technology and investment-intensive direction. In 2013, China’s mould investment reached RMB 1.00186 trillion, which is nearly three time...

China Inverter Welding and Cutting Equipment Industry Report, 2013-2015

Due to the slowdown in economic growth, China shipbuilding, construction machinery and steel structure industries have suffered depression. As a result, the demand for crude steel products is on a dec...

China Road Maintenance Machinery Industry Report, 2013-2015

In recent years, with the constant advance of China’s utilization process and sustained stability in urban fixed-asset investment, the total investment in highway construction enjoyed sustainable grow...

China Non-standard Special Material Equipment Industry Report, 2013-2016

Chinese non-standard pressure vessel enterprises converge in the Yangtze River Delta and the Northeastern regions, wherein the former harbors numerous enterprises and the market there (apart from few ...

China Environmental Protection Equipment Industry Report, 2013-2015

Originated in 1973, China’s environmental protection industry witnessed rapid development in the period of "Eleventh Five-Year" (1996-2010) and "Twelfth Five-Year" (2011-2015) after experiencing the i...

Global and China Agricultural Machinery Industry Report, 2013-2014

Since 2004, driven by agricultural machinery subsidies and other favorable policies, China's agricultural machinery industry has achieved rapid development, the gross output value of agricultural mach...

2005-2014 All Rights Reserved 京ICP备05069564号-1 京公网安备1101054484号