Company Study of Sinoma International Engineering 
  • Jul/2007
  • Hard Copy
  • USD $299 $150
  • Pages:18
  • Single User License
    (PDF Unprintable)       
  • USD $299 $150
  • Code:
  • Enterprise-wide License
    (PDF Printable & Editable)       
  • USD $598 $299
  • Hard Copy + Single User License
  • USD $349 $174

China is the world's largest cement market, and its annual demand takes a share of 48% in global demand. In 2006, cement yield in China exceeded 1.2 billion tons. The growth of the demand of new dry process cement production lines is mainly driven by the newly added cement demand as well as the replacement of behindhand manufacturing techniques.

Presently, per-capita cement consumption in China was only 9.61 tons, far behind the maximum 14 tons in developed countries. As predicted, China's cement yield will be between 1.2 billion tons and 1.3 billion tons in the year 2010. The figure will rise to 1.4 billion tons by 2015.

As of 2006, half of cement yield in China were produced in behindhand shaft kilns or small-scale dry process kilns, and the new dry process production lines only take a share of 50%. In the light of Special Planning for the Development of China Cement Industry, new dry process cement production lines will have a proportion of at least 70% by 2010. It is expected that the demand brought by the upgrading and replacement of behindhand manufacturing techniques will be up to 40 to 50 million tons in 2007-2009.

In 2006, the company earned RMB4.5 billion from abroad, a share of 61.9% in its total revenues. Regarding global market shares (except for Chinese market), Sinoma together with FLsmidth and KHD ranked the top three, accounting for accumulated share of over 70%.

Revenues of Sinoma from Domestic Market and Overseas Market (100 million RMB)

Fluctuations of Cement Demand in China



Figure: Comparison of Yields by New and Old Dry Process Production Lines in China
(Million tons)

1. Company Profile

2. Analysis of Corporate Development
2.1Development of China Cement Industry
2.2 Corporate Development

3. Core Competitiveness
3.1 Complete Industry Service Chain
3.2 Cost Advantage
3.3 Entry Barriers 

4. Future Market Demand
4.1 Domestic Market
4.2 Overseas Market
Actual Controllers of Sinoma International Engineering Co., Ltd
Business Distribution of Sinoma's Subsidiaries by Region
History Development of Cement Engineering in China
Revenue of Sinoma from Overseas Market
More orders from abroad than orders at home
Orders of Sinoma from abroad in 2005
Overseas Business Volume of Sinoma in 2006
Supply Capacity of EPS Contract Services of Sinoma
Comparison of Sinoma's Competition Pattern and FLsmidth's Competition Pattern
Unit Price of Production Capacity
Comparison of Unit Price of Production Capacity between Sinoma's Overseas Projects and Domestic Projects
Periodic Fluctuations of Cement Demand in China
Per-capita Cement Yield in America
Forecast on Output Comparison of New and Old Dry Process Production Lines in China
Consumption Growth Comparison of International Cement Market and China Cement Market 
Consumption Comparison of International Cement Market and China Cement Market 

China Superalloy Industry Report, 2014-2017

A superalloy is an alloy that, generally with iron, nickel, and cobalt as its base alloying element, can resist corrosion and oxidation at a high temperature of some 600℃ and can work for a long perio...

Global and China Graphene Industry Report, 2014-2016

With excellent performance in mechanics, thermology, electricity and magnetics, graphene enjoys broad application prospects in high-performance electronic devices, composite materials, sensors, energy...

Global and China Refractory Material Industry Report, 2014-2016

Refractory material is one of the indispensible materials in such high-temperature industries as iron and steel, building materials, chemicals, nonferrous metals, etc. Over 70% of refractory materials...

Global and China NdFeB Industry Report, 2014-2018

As the third-generation rare earth permanent magnet material, NdFeB is featured with small size, light weight, strong magnetic force and other characteristics as well as widely used in consumer electr...

Global and China Gypsum Board Industry Report, 2014-2016

Global gypsum board capacity was 12.2 billion square meters in 2013, up 8% from a year earlier, and North America was still the region with the largest capacity, accounting for 34%. However, Asia saw ...

Global and China High Barrier Material (PVDC, EVOH, PEN) Industry Report, 2014-2017

High barrier materials can block the penetration of small molecular gas (such as O2, CO2, N2, water vapor), aroma and other organic solvent vapor prominently. By virtue of better barrier performance, ...

China Plastic Pipe Industry Report, 2014-2017

China has become the world's largest producer and consumer of plastic pipes. In 2013, China’s plastic pipe output and demand reached 12.1 million tons and 11.117 million tons respectively, representin...

Global and China Lithium Battery Cathode Material Industry Report, 2013-2014

Global and China Lithium Battery Cathode Material Industry Report, 2013-2014 mainly contains the followings: 1. Brief introduction to lithium battery2. Overview of lithium battery industry3. Lithium...

Global and China Copper Clad Laminate Industry Report, 2013-2016

Copper clad laminate (CCL) is the electronic industrial base material, mainly used for the manufacture of printed circuit board (PCB), widely applied in television, radio, computer, mobile communicati...

Global and China Isostatic Graphite Industry Report, 2013-2016

After 2006, the rapid rise of the global PV industry quickly broke the original supply and demand equilibrium of the isostatic graphite market and made the supply become increasingly tight. In this co...

Global and China Optical Fiber Preform Industry Report, 2013-2016

As the core material of the optical fiber and cable industrial chain upstream, optical fiber preform contributes about 70% of the whole industrial chain profits. In 2013, the global optical fiber pr...

Global and China ITO Sputtering Targets Industry Report, 2013-2016

ITO (indium tin oxide) sputtering targets are one of the core and critical materials in electronic information area, mainly for the manufacture of flat panel liquid crystal displays, touch panel, thin...

Global and China Fluorite Industry Report, 2014-2016

Of extensive use, fluorite is widely applied in fields of metallurgy, building materials, fluorine chemical industry, etc. In 2013, global fluorite reserves attained about 240 million tons, mainly dis...

Global and China Superhard Material and Product Industry Report, 2013-2016

Superhard material industry chain mainly involves the following three aspects: monocrystalline superhard materials (including diamond, cubic boron nitride, etc.), composite superhard materials (includ...

Global and China Lithium Iron Phosphate Material and Battery Industry Report, 2013-2015

Power battery cathode materials mainly include lithium cobalt oxide, lithium manganese oxide, multi-element materials and lithium iron phosphate, of which, global market share of lithium cobalt oxide ...

China Wood Flooring Industry Report, 2013-2016

In recent years, global wood flooring industry under the impetus of floor decorative materials market has seen rapid development, especially in China, which has accounted for about 20 percent global w...

China Modified Plastics Industry Report, 2013-2015

Development of modified plastics industry in China started in the 1990s. Before 1990s, China's modified plastics were almost imported. During 2000-2009, China’s output of modified plastics showed an A...

Global and China MO Source Industry Report, 2014-2015

Global demand for MO source from LED industry has accounted for more than 90% of the aggregate demand for MO source. New-generation solar cell, phase change memory, semiconductor laser and other areas...

2005-2014 All Rights Reserved 京ICP备05069564号-1 京公网安备1101054484号