Increased Productivity For Short Radius Excavators

   Date:2012-02-07

Case Construction Equipment is introducing two C Series short radius excavators, designed and built in Japan to meet the specific requirements of European operators. Featuring Tier 4 Interim engine technology, the CX145C SR and production CX235C SR offer a 17.5% fuel consumption improvement over previous models, with 7% faster cycle times.

Clean Power And Advanced Hydraulics,
Building on the success of the Tier 4 Interim technology introduced in conventional C Series models during 2011, both models use innovative Isuzu diesel engines equipped with cooled exhaust gas recirculation (CEGR) and a diesel particulate diffusor (DPD).  This results in reduced exhaust emissions in line with the latest regulations, and contributes to a 17.5% improvement in fuel consumption.

The short radius excavators share the same easy to use mode selection dial, providing three working modes – Auto, Heavy and Superpower. In addition there is an Auto-Power Boost function that contributes to a 7% reduction in cycle times, boosting productivity.

The latest Case advanced hydraulic system has five additional energy saving features, designed to control the engine and hydraulics more efficiently, by sensing machine working conditions. An increase in valve port diameters and in hydraulic piping diameter aids flow, while systems including Auto Energy Saving, Boom Energy Saving, Spool Stroke Control and Idle Shut Down, lead to a 17.5% fuel economy advance. Outstanding controllability, with up to a 15% increase in lifting performance, allows operators to move more material in a shorter time, while using less fuel.

Class Leading Operator Comfort
The spacious ROPS/FOPS cab delivers new levels of operator comfort, with 5.5% more foot space and independent setting of seat and console positioning. Increased glazing to the front, to the right of the cab, in the cab door and to the rear, plus a new multi-function monitor that can accommodate two rear view cameras, provides exceptional visibility all round for maximum safety on site. The wiper motor for the front windscreen has also been relocated to improve visibility.

In-cab noise levels have been greatly reduced, to just 73dB(A), with external levels of 97dB(A) for the CX145C SR and 101dB(A) for the larger model making the SR machines ideal for urban working. Automatic air conditioning provides a 20% increase in performance and the cabs come with cup holders, MP3 input plugs, storage compartments and a radio mute function switch in the servo joystick.

The new multifunction colour LCD monitor provides an intuitive layout incorporating many of the control systems, greatly reducing the number of switches in the cab. Service and maintenance diagnostic functions can also be accessed through the monitor.

Proven Robust Design
For the two new short radius machines, pre-lubricated Case extended maintenance system (EMS) bushings are used as standard, extending the majority of greasing intervals to 1,000 hours. Remote greasing points and grouped filter locations provide optimum daily maintenance checks and rapid service access.

Larger access doors and non-slip plating on all upper surfaces assist technicians, while a large tool box is now included below the cab floor. Hydraulic oil change intervals are extended to 5,000 hours and both excavators have remote green drain plugs to ensure that there is no risk of environmental contamination. A revised fuel tank and cooling package completes the redesign at the rear of the machine, with separate lift up covers for the engine and radiators now on the CX235C SR providing improved access for cleaning and maintenance.

Specifications

CX145C SR
Operating weight: 14.3t
Engine Output: 101.8hp (74.9kW)
Bucket Capacity: 0.2-0.9 m³
Max. digging force: 66 kN
Max breakout force: 95 kN

CX235C SR
Operating weight: 24.1t
Engine Output: 162.2hp (119.3 kW)
Bucket Capacity: 0.4-1.3 m³
Max. digging force: 110 kN
Max breakout force: 152 kN

Supporting The Equipment Market
Case Construction Equipment continues to build on its traditional strengths, this year celebrating 170 years of partnership with customers and dealers around the world. The company has guaranteed substantial investment in new technologies and will continue with development of innovative equipment solutions, through further investment in Tier 4 engines and other technologies.

Case continues to invest in the best dealer network in the business too, offering additional training for new dealer partners that have recently joined the Case family. The Case Customer Centre Paris has also benefitted from additional resource, with a dedicated area for technological innovation, demonstrating the latest engine, transmission and hydraulic technology for both dealers and customers.

Case will expand its popular Rodeo operator competition this year, allowing operators from across Europe to pit their driving skills against the finest operators from around the world.

 

2005-2011 www.researchinchina.com All Rights Reserved 京ICP备05069564号-1